[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] how to input the width of strip of under slab insulation




Dear all
I'm using the slab program to calculate the ground temperature. when I inputs the vaule of the width of strip of under slab insulation, I doesn't know how to input the width of under slab insulation.
My studing model is low floor radiator heating system, the whole under floor is insulated.
There only are SlABDEPTH(Thickness of slab on grade),CLEARANGE(Distance from edge of slab to domain edge),ZCLEARANGE(Depth of range below slab),pRatio(The area to perimeter ratio for this slab ) objects in the input file.
There aren't the width and leght of slab in this input file.
So I doesn't know how to input the width of strip of under slab insulation
Thanks for you attention
Lei Wang
 
 
 

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/