[EnergyPlus_Support] Defining radiant panel geometry

["lorenzomattarolo" <lorenzomattarolo@xxxxxxxx>]

Dear support,

I have a basic question related to the definition of the geometry of
the radiant panels.

In "surfaceHeatTransfer" I added the coordinates of a square ceiling;
for example the coordinates are (0,10) (0,0) (10,0) (10,10).

Then I added the surface with a "construction with internal source".
This type of construction has both the layers of the ceiling and the
layers referred to the structure of the panels.
The coordinates of the radiant-ceiling panels are: 
(2.5,7.5) (2.5,2.5) (7.5,2.5) (7.5,7.5)

I'm wondering if it is correct to insert these coordinates, or it is
being making a mistake to consider "twice" the surface where the
panels are located.

Thanks a lot for your help!

Lorenzo




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/