[EnergyPlus_Support] very confused

["neslihanturkmenoglu" <neslihanturkmenoglu@xxxxxxxxx>]

hi again
if I am using cross ventilation UCSD airflow model, at the same time I 
am doing solar radiation simulation, in which order does the program 
work to get interior surface temperatures. Which part gets information 
from other in sequence?

2-Which temperatures I have to give as input before simulation run?

3-For interior surface convection coefficients which expression -mixed 
convection heat transfer coefficient formula explained on page 348
(Engineering reference)for UCSD cross ventilation model or the 
expression described on page 49(engineering reference)-ceiling diffuser 
algorithm- does the program use? ?
and if I want to give my own surface convection coefficients, in which 
parts will they be included to the program?



thank you very much



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/