[EnergyPlus_Support] errors about zone splitter

["beyangj" <beyangj@xxxxxxxxxxx>]

Dear all,

When I opened the IDF file exported from a DesignBuilder model, there 
were many IDF Paring Error  messages popup one by one. The message is 
¡°Too many fields for objects: ZONE SPLITTER¡±.  

There are 6 zones every floor, and there are 40 stories in my 
DesignBuilder model. When there are less than 10 stories in the model, 
there is no error message poping up when  I opened the IDF file 
exported from a DesignBuilder model. When there are more than 10 
stories in my DesignBuilder model, the Error messages mentioned above 
popup again when I open the IDF file exported from it. There is no 
error when I run my model in DesignBuilder. Could you help me why this 
happened?  Thanks a lot in advance.

Young



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/