[EnergyPlus_Support] Simulation with Design Bulder - HVAC Templates

[André Lopes <andr_lopes2000@xxxxxxxxx>]

Hi

I have a multizone building which has the Following System Configuration:

- Boiler with water radiators
- Chiller with fan-coil
- 6 Air Handling Units (Constant Air Volume, 1 heating coil, 1 cooling coil and using OUTSIDE AIR) with Heat Recovery

Which of these HVAC Templates can I use to simulate de above mentioned System (Selecting "HVAC COMPACT" on the "Simulation Tab"):

    - Constant Volume ?
    - Constant Volume with direct expansion ?
    - Other Template ?

In understood that on these templates, I have to put the same characteristics on the exhaust and Supply Fan. Correct?

Best Regards

A L


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/