[EnergyPlus_Support] building envelop load

["olifpp" <olifpp@xxxxxxxxx>]

hello: 
     i have a question that " how to get the heating load and coolind 
load of the building envelop hourly?"
     i try to plus "Zone Opaque Surface Inside Face Conduction Loss" 
and "Zone Transmitted Solar" and "Zone Window Heat Loss", and i think 
the sum of the three is the building envelop load.
     and  i also use the " purchased air" model to simulate the same 
building in which there is no people,lighting and equipment. i think 
the purchased air heating rate and the purchased air cooling rate is 
the building envelop load hourly.

    but the first result  is not equal to the second, do  i understand 
mistakenly? can you give me some help? thanks much!



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/