[EnergyPlus_Support] Problem ON Domestic Hot Water Loop

["mingming_zuo" <mingming_zuo@xxxxxxxxx>]

Hi All, recently I worked on a model in which one DHW Loop is coupled 
to hot water loop, in my opinion, when hot water from HW Loop is 
consumed by DHW Loop,so,in order to achieve a mass balance in hot water 
loop, additional makeup water should be provided to this hot water loop.
My question is the amount and inlet temperature of this makeup water is 
determined in Energyplus! 
Thank you in advance!


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/