[EnergyPlus_Support] fullexteriorand interior

["neslihanturkmenoglu" <neslihanturkmenoglu@xxxxxxxxx>]

hi I have confusion about beam solar radiation. Does it mean the otal 
of direct and diffuse solar radiation?

I used FullExteriorandInterior option to consider sunlit areas on 
interior walls. I get 0 values for back and left walls in Beam solar 
intensity from exterior window on inside of surface and Beam solar 
amount from exterior window on inside of surface' reports. And for 
floor it gives the total area when I divide these report values. In my 
other shading analysis work in morning hours sunlit areas occur on left 
wall.If Shaded areas get diffuse radiation and sunlit areas get 
diffuse+ direct radiation, does it mean that the floor gets all the 
solar radiation on itself? 

thank you very much.
I uploaded my csv file


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/