[EnergyPlus_Support] no source flow through COIL:WATERTOAIRHP:EQUATIONFIT:HEATING

["Miguel Angel Pascual" <mapascual@xxxxxxxxx>]

Dear Group,

 

I have submitted to the problems area the file: no_source_flow.idf. I think
there is a problem with the model of the
COIL:WATERTOAIRHP:EQUATIONFIT:HEATING because there is no flow through the
source coil. I have changed this object to the PARAMETERESTIMATION model and
by now seems to work fine. 

 

In the submitted example you will find a few EQUATIONFIT coils (not working)
and one PARAMETERESTIMATION coil (working).

 

Can anybody check this?

 

Thanks in advance.

 

MA



[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/