[EnergyPlus_Support] detailed opening-discharge and

[neslihan turkmenoglu <neslihanturkmenoglu@xxxxxxxxx>]

Hi 
I want to check the way I used for flow rate
calculation. 
Energyplus doesn't consider the effects of shading
devices on volume flow rates. I calculated discharge
coefficients for every alternatives of openings with
shading device but I used the same  opening width and
height factors or every alternatives in energyplus as
I used opening areas in the calculation.Is it the
right way?
If I didn't do it like this I don't have any idea  how
to define start point for an opening occuring on
window with for example with a blind hving a lot of
start points.

 Thank you vey much for your help



      ____________________________________________________________________________________
You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.  
http://tc.deals.yahoo.com/tc/blockbuster/text5.com

------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/