[EnergyPlus_Support] Minimum Inlet Air Temperature for Heat Pump

["anarui.oliveira" <anarui.oliveira@xxxxxxxxx>]

Hi.

Can anyone tell me why, in the "Heat Pump:Water Heater" model, 
the "Minimum Inlet Air Temperature for Heat Pump Compressor Operation" 
is 5ºC? Couldn't find any mention to it the documentation.

How can I model a HeatPump that is used for heating water for a 
climatization system (with Hot Water coils), using outside air, in 
regions where the outdoor temperature drops below 5ºC?

Regards,
Ana Rui.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/