[EnergyPlus_Support] Modelling Cross-Flow Heat Recovery Systems

[Nuno Costa Brandão <ncostab@xxxxxxxxx>]

Just poping this back hoping to get some guidance help.

Thanks
Nuno

---------------------------------------------------------------------
Dear All,

I'm performing a simulation of small building which as an air-to-air
heat recovery system ventilation(HRV)with a cross flow heat exchanger,
commonly used in passive houses.
Which is the best way to simulate this kind of system? Is it possible
using the COMPACT HVAC objects?

Thanks for the help
Nuno


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/