[EnergyPlus_Support] (Still) airflow balances!

["anarui.oliveira" <anarui.oliveira@xxxxxxxxx>]

Thank you all for your previous answers, and please tolerate my 
insistence...
I see your point about balancing airflows in the source zone, and I 
think I've got that covered.

....But, returning to a simple example of 2 zones:
- one conditioned (Zone 1), with forced supply air (which can be 
modelled by E+ system and zone level objects)
- and another unconditioned (Zone 2), which:
   - receives some airflow by depression from the conditioned zone 
(here I would use a Mixing object(source Zone 1, target Zone 2), and 
an exhaust fan in Zone 1 (a plain E+ Exhaust fan, no tricks), just 
to make sure that the source zone also feels the effect of losing 
that amount of conditioned air)
   - but then in the unconditioned zone, the HVAC project says there 
will also be a regular, forced exhaust airflow (although there is no 
mechanical air supply directly to this zone), and it is this part, 
this exhaust... this balance at the unconditioned zone (which is the 
target zone for the mixing object), that I don't quite see how to 
implement...
   - and should I care?... It's not very clear to me, but I seems 
that if I do force the exhaust of that amount of air, the 
unconditioned zone will continuosly lose some its partially 
conditioned air (energy), at the same time as it receives new air 
from the adjacent zone, while if I don't balance it, it seems it 
continuosly accumulates warm air and only loses heat through the 
envelope?...

Sorry, I have the feeling I'm not making myself very clear, but...
.... again, any additional hint would be greatly appreciated!

Ana.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/