[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Google Sketch Up error Issues

 

Hi Nuno,

 

The irregularities in geometry appear in the DXF that EnergyPlus writes out too, so it is not an import error in the plugin.  My guess is that you might not have been as accurate as you thought when you were doing the supplemental work in the plugin.  It's pretty easy to misalign surfaces when using SketchUp unless you are careful to use its "snap-to" features.  Another possibility is that you made some misalignment mistakes in DesignBuilder when you were first drawing the model.  Unless you have an original version of the IDF from DesignBuilder (which you might have), it's hard to say what happened.  I think you should be able to easily repair these irregularities using the plugin and without any risk of harming the model.  That said, it's always good to make backups along the way...

 

P

 

________________________________

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Nuno Costa Brandão
Sent: Thursday, May 01, 2008 5:33 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Google Sketch Up error Issues

 

Hi Peter,

I´m writing hoping that you could give me some guidance help on a
model in which I´m working for some time. The building is a
SuperMarket drawed with DesignBuilder from which I exported the idf
file and used the Skecth Plugin to do all the suplemental work with
geometry. The problem is that there are some irregularities on the NW
block side of the building. When we look closer to the two floor block
side, the plugin seems to have separate the blocks from the main
bigger block leaving a air space between them. Why doesn't this happen
? I can I effectively correct this error without "harming" the model
and compromise the simulation?

Thank you very much for the help
Nuno

P.S. I´m sending the SuperMarket idf file so that you can have a look
at it.

 



[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/