[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Multy-Story Building Modelling problems



Just poping this back hoping to get an answer. I´m a little bit
desperate here, any help or comment will be very useful.

Thanks
Nuno
------------------------------------
> Multy-Story Building Modelling problems
> 
> Q.:Dear All,
> 
> Currently I´m simulating a multi-story building from which I choose
> only a representative story to evaluate its energy consumption. As it
> is described in I/O 
> 
> reference I set the boundary conditions of the floor by pointing it to
> the roof construction surface and the roof construction surface
> pointing to the floor, 
> 
> by using the "otherzone surface exterior boundary" condition. Is the
> procedure correct? 
> 
> The simulation generated some warning messages from which I don´t
> fully understand its impaction. I´ve placed below the three kind of
> warnings. I´ve have 
> 
> followed the warning recomendations but I couldn´t resolve the
> problems, can you give me some guidance help?
> 
> I´m uploanding the idf file so that you can have a look at it.
> 
> Thanks, I really apreciate the help... I´m already behind schedule
> with this work!!
> Nuno
> 
> 
> #1. ** Warning ** CAUTION -- Interzone surfaces are usually in
> different zones
>    **   ~~~   ** Surface=S_T1A-COZINHA_0_0_0, Zone=T1A-COZINHA
>    **   ~~~   ** Surface=R_T1A-COZINHA_1_0_0, Zone=T1A-COZINHA
> 
> [...]
> 
> #2. ** Warning ** Zone Air Heat Balance is out of balance for zone
> named T1A-SALA
>    **   ~~~   ** Zone Air Heat Balance Deviation Rate is more than
> 60.3 (Watts)
>    **   ~~~   **  Occurance info: Occurrence info=Lisboa PRT INETI
> data WMO#=085360, 01/02 07:00 - 07:15
>    ** Warning ** Zone Air Heat Balance is out of balance for zone
> named T1A-QUARTO
>    **   ~~~   ** Zone Air Heat Balance Deviation Rate is more than
> 37.8 (Watts)
> 
> [...]
> 
> 3#. Too many vertices [>=13] in shadow overlap errors occurring...
>    ************* These occur throughout the year and may occur several
> times for the same surfaces. You may be able to reduce them by adding 
> 
> DIAGNOSTICS,DoNotMirrorDetachedShading;
>    *************
>    ** Warning ** Too many vertices [>=13] in a shadow overlap
>    **   ~~~   ** Overlapping figure=Mir-EDIFICIO APARTAMENTOS -
> COMPONENT BLOCK 2 - SURFACE 4 (10), Surface Class=[Detached
> Shading:Building]
>    **   ~~~   **   This error occurred 1 times.
>    **   ~~~   ** Figure being Overlapped=Mir-EDIFICIO APARTAMENTOS -
> COMPONENT BLOCK 4 - SURFACE 2 (20), Surface Class=[Detached
> Shading:Building]
>    *************
>    **   ~~~   **   The too many vertices errors occurred 1 times (total)
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/