[EnergyPlus_Support] Low Temp Radiant System Constant Flow

["Elreq" <tolteca33@xxxxxxxxx>]

Dear E+,

I am simulating a single floor of an office building with an
integrated underslab radiant heating floor. The simulation completes
successfully but I get the following message error several times: 

** Warning ** Flow mismatch in radiant system--result will be an
energy imbalance--should not get this error
   **   ~~~   ** WaterInjectionRate=-1.58E-003, in Radiant
System=NORTH ZONE RADIANT FLOOR,
   
Does thing has something to do with the rated volumetric flow rate of
the system? 

Thank you in advance.

If I need to upload the file please let me know.

Regards,
Santiago




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/