[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Report:Table:Monthly
Dear Group,
I would like to report the variable "Zone Opaque Surface Inside Face
Conduction Loss Energy" while there is a heating load in the zone. I have
asked for the following table:
Report:Table:Monthly,
cerramientos perdidas, !- Name
3, !- DigitsAfterDecimal
Zone/Sys Sensible Heating Energy,
HoursNonZero, !- AggregationType01
Zone Opaque Surface Inside Face Conduction Loss Energy,
SumOrAverageDuringHoursShown, !-
AggregationType01
Zone Opaque Surface Inside Face Conduction Loss Energy,
SumOrAverage; !- AggregationType01
The problems is that the column headed by "SumOrAverageDuringHoursShown"
reports 0 values.
Any help? Thanks in advance,
Miguel Angel
[Non-text portions of this message have been removed]
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/