[EnergyPlus_Support] will the higher cooling coil setpoint affect indoor air temperature control?

["lichunying83" <lichunying83@xxxxxxxxx>]

Hello, all

I am doing a simulation, where I supply air with higher temperature 
(17degree centigrade, this is simular with the cooling coil 
setpoint, right?) into a room. The indoor temperature is set to be 
25degree centigrade. 

Now I found that this higher supply air temperature may be affecting 
the control of indoor air temperature. The indoor air temperature 
cannot be maintained at the preset point. 

If I reset the cooling coil setpoint to be 16degree centigrade or 
lower, the indoor air temperature control will be OK.

SO I guess the higher cooling coil setpoint may somehow affect 
indoor air temperature control? Is this correct?

Has anyone have encountered this problem before? How to solve this?

Thank you!


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/