Re: [EnergyPlus_Support] Simple Sizing Parameter Question

[Jonathan Hackersmith <hacker_jon@xxxxxxxxx>]

Please let me know if something needs clarification.

----- Original Message ----
From: hacker_jon <hacker_jon@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Thursday, July 10, 2008 3:50:16 PM
Subject: [EnergyPlus_Support] Simple Sizing Parameter Question

Hello,

I have been reviewing the sizing parameter and zone sizing options.
These seem useful, but I am interested in modifying the sizing
parameter say for heating and leaving cooling as is. Many of my sizing
values are set to "AUTOSIZE".

I have figured out that I can go into the *.eio file and look up the
sizing of my components, modify it by the parameter I determine and
replace that new value with the "AUTOSIZE" in my *.idf file. Is there
an easier way to achieve a similair result?

Thanks,

Jon

__._,_.___








The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___