RE: [EnergyPlus_Support] Simple Sizing Parameter Question

You can’t automatically use separate sizing factors for heating and cooling.

(For a single air system that does both heating and cooling, it isn’t clear how separate sizing factors would really play out for things like air flow rate.)

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Jonathan Hackersmith
Sent: Friday, July 11, 2008 3:03 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Simple Sizing Parameter Question

Please let me know if something needs clarification.

----- Original Message ----
From: hacker_jon <hacker_jon@yahoo.com>
To: EnergyPlus_Support@yahoogroups.com
Sent: Thursday, July 10, 2008 3:50:16 PM
Subject: [EnergyPlus_Support] Simple Sizing Parameter Question

Hello,

I have been reviewing the sizing parameter and zone sizing options.
These seem useful, but I am interested in modifying the sizing
parameter say for heating and leaving cooling as is. Many of my sizing
values are set to "AUTOSIZE".

I have figured out that I can go into the *.eio file and look up the
sizing of my components, modify it by the parameter I determine and
replace that new value with the "AUTOSIZE" in my *.idf file. Is there
an easier way to achieve a similair result?

Thanks,

Jon

__._,_.___

The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___