[EnergyPlus_Support] combine rooms to zone , modeling treated fresh air

["drjonesg1958" <drjonesg1958@xxxxxxxxx>]

Hi all I am new to simulation.
Can some one explain 
1. is it okay to combine multiple rooms with varying internal loads
into  one thermal zone (exposure of rooms is similar)
2. If acceptable, then how to get design loads / simulation results of
individual rooms when they are clubbed into a zone
3. How to a model a system where individual rooms have a fcu and fresh
air is supplied through are separate treated fresh air AHU to each fcu
with no control.

thanks   


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/