Re: [EnergyPlus_Support] modeling limitation for DOE-2.1E that did not allow the simulation of CASE195

[Linda Lawrie <linda@xxxxxxxxxx>]

Look at the chart on page 41 of the report.  The note
says:

Only ESP is
recognized by
ASHRAE Standard
140 as having valid
result; other programs
are not capable of
modeling spec for
interior and/or exterior
shortwave
absorptance = 0.1

Linda

At 10:16 AM 8/16/2008, Simge Andolsun wrote:

> In the report entitled
> ¡EnergyPlus Testing with Building Thermal Envelope and Fabric Load Tests
> from ANSI/ASHRAE Standard 140-2007 EnergyPlus, Version 2.2.0.023¢, it
> says that the solid conduction case (case 195) of EnergyPlus was compared
> only one other program (ESP) due to modeling limitations in the other
> programs. What was the modeling limitation for DOE-2.1E that did not
> allow the simulation of CASE195?
>
>  
>
> Could you please let me
> know?
>
> <?xml:namespace prefix = o ns =
> "urn:schemas-microsoft-com:office:office"
> /> 
>
> Thanks,
>
>  
__._,_.___








The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___