[EnergyPlus_Support] Error message

[Sundaram <ksundaram81@xxxxxxxxx>]

Dear All,

 

I have just started using design builder ,I tried to simulate a small office building in a hot humid country (dubai).i am getting the following error.

 

Program Version,EnergyPlus 2.2.0.023, 8/28/2008 5:35 PM,IDD_Version 2.2.0.023

** Warning ** Requested Time Steps in Hour (2) is less than the suggested minimum of 4.

************* Beginning Zone Sizing Calculations

** Warning ** GetHTSubSurfaceData: A Multiplier > 1.0 for window/glass door W_19014_2_0_0_0_0

** ~~~ ** in conjunction with SolarDistribution = FullExterior or FullInteriorExterior

** ~~~ ** can cause inaccurate shadowing on the window and/or

** ~~~ ** inaccurate interior solar distribution from the window.

** Warning ** GetHTSubSurfaceData: A Multiplier > 1.0 for window/glass door W_19025_7_0_0_0_0

 

Could any one tell me the reason for these error..& Give some solution for these.

 

K.Sundaram
Mechanical Engineer

Proleed Engineering Consultants
Head Office:
408-B, Habroush Building,
Al Mina Road,
P.O.Box: 119592
Dubai, UAE

Dubai Off. Tel:+971 4 345 0046
Dubai Off. Fax:+971 4 345 0084
Mob.: 050-9236147

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___