[EnergyPlus_Support] about stand-alone energy recovery ventilator

["llyymmff" <liyuemingff@xxxxxxx>]

Hello, all
   I have a problem about simulation of stand-alone energy recovery 
ventilator (ERV). I want to use ERV in the heat pump: air to air 
system. I don't know if this is feasible. I add the ERV system into 
heat pump system according to the example file: 
HVACStandAloneERV_Economizer (this example is in a Window AC system). 
I always get the error warning just like the following:
** Severe  ** CONTROLLER:STAND ALONE ERV Name, cannot be blank.
I checked the IDF again and again, and I can be sure that I did input 
the CONTROLLER:STAND ALONE ERV Name. I cannot understand this, and 
could you please help me?
   Thank you very much!
   Best Regards!

   ym


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/