[EnergyPlus_Support] Averaging thermostat?

["careym.cosmaj" <mc@xxxxxxxxxxxx>]

Just a quick question, and it may be totally dumb, there does not
appear to be an Set Point Manager:Averaging.

It may be possible to command setpoint from a node downstream of a
ZONE:MIXER object in the return air stream, however this will not get
me the average zone temperature.

When I have multiple zones connected to a single system I can use
either Set Point Manager:Warmest or Set Point Manager:SingleZone
Cooling allowing me to control from the warmest zone or the one I
specify but not allowing an average to be taken into account.

Is there some trickery than can be done with a Set Point Manager:Mixed
Air where it gets a little abused by pretending two zones are a fan or
something similar to get an average in the current time step?

Thanks for any suggestions.

Regards,

Mark Carey


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/