[EnergyPlus_Support] Re: Simulating Chilled Beams Equipment

["aymericnovel" <aymericnovel@xxxxxxxxx>]

Hi,

I don't really understand what is different between a chilled beam 
model and the 4pipe:induc model. 

Thanks
Aymeric

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Fred Buhl <wfbuhl@...> 
wrote:
>
> The chilled beam model used in (for example) Doe-2 is convective 
only. A 
> similar effect can
> be obtained in EnergyPlus by using a central forced air system with 
4 pipe
> induction terminal units (SINGLE DUCT:CONST VOLUME:4 PIPE INDUC).
> 
> The chilled beam model in EnergyPlus is overdue; it will be 
implemented 
> in the
> near future.
> 
> Fred Buhl
> 
> Nuno Costa Brandão wrote:
> > Dear Group Supporter's,
> >
> > I´m simulating a Multi-Story building which uses "Chilled Beams"
> > equipment. What is the best approach to simulate this kind of
> > equipment in EnergyPlus?
> >
> > Thanks in advance
> > Nuno Brandao
> >
> >
> >
> >
> >
> >
> >
> > The primary EnergyPlus web site is found at:
> > http://www.energyplus.gov
> >
> > The group web site is:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> > Attachments are not allowed -- please post any files to the 
appropriate folder in the Files area of the Support Web Site.
> >
> > EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf 
under the Documentation link and press the "search" button.
> >  
> > Yahoo! Groups Links
> >
> >
> >
> >
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/