[EnergyPlus_Support] solar collector to sky radiator

["ian8512" <ian8512@xxxxxxxxxxxx>]

I am going to stimulate a sky radiator using an existing example in 
energy plus - solar collector.

In the solar collector, there are 4 components, they are the flat 
plate, storage tank, heater and water use connections objects.

I am trying to change it to 2 components, falte plate and a storage 
tank. And the operation time will be at night(21:00 to 6:00)
and the set point temperature of the storage tank will be around 20 
deg. celeus to 16 deg. celeus.

However, everytime, there are so many errors after I attempted to 
change those parameter and setting.

Could somebody lend a helping hand??


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/