[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE : Re: [EnergyPlus_Support] HAVC:Zone Fancoil outputs



I check the rdd file and there are outputs related to fancoil as:
HVAC,Average,Fan Coil Heating Rate[W]
HVAC,Sum,Fan Coil Heating Energy[J]
HVAC,Average,Fan Coil Total Cooling Rate[W]
HVAC,Sum,Fan Coil Total Cooling Energy[J]
HVAC,Average,Fan Coil Sensible Cooling Rate[W]
HVAC,Sum,Fan Coil Sensible Cooling Energy[J]
HVAC,Average,Fan Coil Electric Power[W]
HVAC,Sum,Fan Coil Electric Consumption[J]
HVAC,Average,Fan Electric Power[W]
HVAC,Average,Fan Delta Temp[C]
HVAC,Sum,Fan Electric Consumption[J]
HVAC,Sum,Total Water Heating Coil Energy[J]
HVAC,Sum,Water Heating Coil Hot Water Consumption[J]
HVAC,Average,Total Water Heating Coil Rate[W]
HVAC,Sum,Total Water Cooling Coil Energy[J]
 
But I did not those outputs in the report variable and I find other outputs as:
FAN COIL HEATING RATE
FAN COIL HEATING RATE
 
But when I put those outputs E+ gives this waning  
 
Warning ** The following Report Variables were requested but not generated
   **   ~~~   ** because IDF did not contain these elements or misspelled variable name -- check .rdd file
   ************* Key=5024, VarName=FAN COIL HEATING RATE, Frequency=Hourly
   ************* Key=5024, VarName=FAN COIL ELECTRIC CONSUMPTION, Frequency=Hourly
   ************* Key=5024, VarName= FAN COIL HEATING RATE FAN DELTA TEMP, Frequency=Hourly
   ************* Key=5024, VarName=TOTAL WATER HEATING COIL RATE, Frequency=Hourly
   ************* Key=5024, VarName=BOILER HEATING OUTPUT RATE, Frequency=Hourly
   ************* Key=5024, VarName=BOILER GAS CONSUMPTION, Frequency=Hourly
   ************* Key=5024, VarName=BOILER WATER INLET TEMP, Frequency=Hourly
   ************* Key=5024, VarName=BOILER WATER OUTLET TEMP, Frequency=Hourly
   ************* Key=5024, VarName=BOILER WATER MASS FLOW RATE, Frequency=Hourly


Linda Lawrie <linda@xxxxxxxxxx> a �it :
All the reporting variables available for your run are in the .rdd (simple variables) and .mdd (meters) files after your run.

Linda

At 10:00 AM 11/27/2008, houcem mechri wrote:
Dear Friends,
I'm using compact HAVC:Zone Fancoil (with the other fields chilledloop,chiller,tower, hotloop and boiler) can someone tell me if  I can obtain outputs related to fan coil?
thanks
HAVC:Zone Fancoil outputs

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___