[EnergyPlus_Support] Problem in non-dimensional height calculation???

["maize_lee" <liyuming1123@xxxxxxx>]

Hello,

when I modeled an atrium with constant gradient roomair model, some 
warnings are reported:
Warning ** Problem in non-dimensional height calculation, too high 
surface:REVERSE_EL3 EAST WALL (G.C6.I20) in zone: 1F_ATRIUM
   **   ~~~   ** **** Average Ceiling height of zone is: 8.000
   **   ~~~   ** **** Surface Maximum height is: 12.000


I don't know what it means and have anyone met this before? Or How to 
deal with it?

Thank you! 


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/