[EnergyPlus_Support] Fan Coil Total Cooling

["Florian Stift" <florian.stift@xxxxxxxxx>]

Hi all, 

I'm confused about the results I'm getting for a single zone fan coil
 simulation with purchased air (FAN COIL UNIT:4 PIPE). I've set the
thermostat to single heating setpoint, and can see that the zone
temperature is free floating above the heating temperature. The Total
Water Cooling Coil Rate is zero as expected. However, the Fan Coil
Total Cooling Rate is not zero, but cycling for the whole year,
averaging 400W. Shouldn't the Fan Coil Total Cooling Rate be zero? 


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/