[EnergyPlus_Support] CV AHU and Secondary FCU in Zone

["Alan Jackson" <alanjackson7@xxxxxxxxx>]

Sorry to bring this up again but did not get any response the initial
go around. I would like to model a CV air system supplying ventilation
and cooling to a zone that also has perimeter recirculation console
FCUs. Do I need to have a seperate perimeter zone just for the FCUs or
can I have both CV and FCU in the same zone using direct air or
something like that.

I just don't want to go back and have to add perimeter zones after
finding out it doesn't work, otherwise i would just attempt it myself.

thanks in advance

-
aj



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/