[EnergyPlus_Support] baseboard:radiant/convective

["kristin1goovaerts" <kristin1goovaerts@xxxxxxxxx>]

hello,

I'm modelling hot water radiators. I'm using the Baseboard:RadiantConvective object. The surfaces that are radiated have to be chosen from the drop down list in the field 'Surface x name'.
When the file is simulating I always get the error : problem with baseboard input : invalid surface name.
The surfaces are well defined in the 'BuildingSurface:Detailed' class since I was able to run the IDF file prior to defining the baseboards.

thanks 




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/