[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Schedule Output in CSV

You can usually report the schedule value based on how the schedule is used.

For example, if the schedule is used to place a set point at a node, use 
this in your input file:

  Output:Variable,
    *,                       !- Key Value
    System Node Setpoint Temp,        !- Variable Name
    hourly;                  !- Reporting Frequency

If the schedule is used in the thermostat object:

**  Output:Variable,
    *,                       !- Key Value
    Zone/Sys Thermostat Heating Setpoint,        !- Variable Name
    hourly;                  !- Reporting Frequency

  Output:Variable,
    *,                       !- Key Value
    Zone/Sys Thermostat Cooling Setpoint,        !- Variable Name
    hourly;                  !- Reporting Frequency

Check the rdd file to see what report variables are available for your 
simulation.

le_carambar wrote:
>
>
> Dear E+ users,
>
> The object output:schedules write schedule values in .eio files.
> I would like make appear the value of schedules in csv file.
>
> Somebody have an idea ?
>
> Thanks a lot,
>
> Camille T.
>
> 

-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/