[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Sistema de Aquecimento Central. Como o controlar?



Boa tarde. Estou a tentar implementar um sistema da aquecimento com uma caldeira a gás, uma bomba e um convector (ZoneHVAC:Baseboard:RadiantConvective:Water)

Meti um termostato apenas para aquecimento para este desligar o aquecimento a partir dos 24ºC, a caldeira e a bomba estão definidas para funcionar durante o período da noite.
Fiz o plant Loop obviamente com os respectivos splitter e mixer.

Simplesmente quando gero os gráficos, não vejo influencia nenhuma na temperatura interna. O sistema não está a funcionar.

É necessário fazer algum circuito de ar? Uma das formas de meter os Setpoints, pedem-me os Nodes de entrada e saída de ar, mas um convector não tem circulação de ar. Como defino estes nós?

Alguém me pode ajudar, não faço ideia do que está aqui a falhar.

obrigado.



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/