[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Dedicated OA System

Hello Everyone,

I have just started studying the Energy Plus Program and I have a quick question.  I'm trying to model a system that uses Fan coils on recirculated air and Outside air is brought via a dedicated system into the space.  In reality, these are two entirely different systems and the outside air should run 24 hours per day while the fan coil only cycles on to meet the loads.  

Is there a way to put two systems into one zone?  I was thinking about making the ZoneHVAC:EquipmentConnections "Zone Air Inlet Node or NodeList Name" have a nodelist with 2 nodes.  One for each system.

I would like to hear if this is a good method and what other suggested methods are.  Thank you.



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/