[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Dedicated OA System

That is exactly the way you should simulate your model. Review the 
ZoneWSHP_wDOAS.idf example file. You should have no problems if you 
change the zone equipment to be a fan coil unit.

grandocu wrote:
>
> Hello Everyone,
>
> I have just started studying the Energy Plus Program and I have a 
> quick question. I'm trying to model a system that uses Fan coils on 
> recirculated air and Outside air is brought via a dedicated system 
> into the space. In reality, these are two entirely different systems 
> and the outside air should run 24 hours per day while the fan coil 
> only cycles on to meet the loads.
>
> Is there a way to put two systems into one zone? I was thinking about 
> making the ZoneHVAC:EquipmentConnections "Zone Air Inlet Node or 
> NodeList Name" have a nodelist with 2 nodes. One for each system.
>
> I would like to hear if this is a good method and what other suggested 
> methods are. Thank you.
>
> 

-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/