From: Richard Raustad <RRaustad@xxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Thu, November 19, 2009 11:17:16 AM
Subject: Re: [EnergyPlus_Support] Dedicated OA System
That is exactly the way you should simulate your model. Review the
ZoneWSHP_wDOAS.idf example file. You should have no problems if you
change the zone equipment to be a fan coil unit.
grandocu wrote:
>
> Hello Everyone,
>
> I have just started studying the Energy Plus Program and I have a
> quick question. I'm trying to model a system that uses Fan coils on
> recirculated air and Outside air is brought via a dedicated system
> into the space. In reality, these are two entirely different systems
> and
the outside air should run 24 hours per day while the fan coil
> only cycles on to meet the loads.
>
> Is there a way to put two systems into one zone? I was thinking about
> making the ZoneHVAC:EquipmentConnections "Zone Air Inlet Node or
> NodeList Name" have a nodelist with 2 nodes. One for each system.
>
> I would like to hear if this is a good method and what other suggested
> methods are. Thank you.
>
>
--
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu
UCF - From Promise to Prominence: Celebrating 40 Years
------------------------------------
The primary EnergyPlus web site is found
at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/