[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] 3D geometry input





where do i find the sample files? thanks again

On Dec 6, 2009, at 7:44 PM, Linda Lawrie wrote:

There are two example files that use these surfaces (they use all of
them... to illustrate that they work). 4ZoneWithShading_Simple_1.idf and
4ZoneWithShading_Simple_2.idf They are only "simple" in that they have
simple descriptions.

One of the buildings is surrounded on three sides by ground. For a half
buried wall, you would need to enter two walls, one with ground contact,
one as exterior.

Yes, they should be fine for compliance if you can represent your building
that way.

Linda




__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___