(Above is just copied from the EIO file -- that format
is fine for EnergyPlus, when put in IDF Editor and output, you can see
the properties match):
WindowMaterial:Glazing,
W5:DOUBLECLEAR:1:GLASS1, !- Name
SpectralAverage, !-
Optical Data Type
,
!- Window Glass Spectral Data Set Name
0.00297,
!- Thickness {m}
0.85000,
!- Solar Transmittance at Normal Incidence
0.08000,
!- Front Side Solar Reflectance at Normal Incidence
0.08000,
!- Back Side Solar Reflectance at Normal Incidence
0.90000,
!- Visible Transmittance at Normal Incidence
0.08000,
!- Front Side Visible Reflectance at Normal Incidence
0.08000,
!- Back Side Visible Reflectance at Normal Incidence
0.00000,
!- Infrared Transmittance at Normal Incidence
0.84000,
!- Front Side Infrared Hemispherical Emissivity
0.84000,
!- Back Side Infrared Hemispherical Emissivity
0.90000,
!- Conductivity {W/m-K}
1.00000,
!- Dirt Correction Factor for Solar and Visible Transmittance
No
;
!- Solar Diffusing
At 01:11 AM 12/7/2009, vincent lacour wrote:
Thanks, Linda,
is there a way to automatically input these w5 materials back into the
idf file?