[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Zone Modifications



Vinay:

You can have both, but you don't have to.  A few versions back, the feature was added to specify the outer boundary condition of a surface as another zone, while will duplicate the wall, reversed, internally in the program.  This way you don't have to specify it twice.

Edwin

On Tue, Dec 8, 2009 at 19:11, Vinay Devanathan <vinay.devanathan@xxxxxxxxx> wrote:
 

Linda,


Thanks for the reply. I have another question - 

When I have imported a file into E+, under Surface:HeatTransfer, I get the wall surface repeated twice - once with construction material and once with the construction material reversed. I have got to have both as such or is it an instance?

Thanks in advance.


On Tue, Dec 8, 2009 at 8:01 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
 

you will need to delete all references to that zone (like in People,
Lights, and other objects)



On Tue, 8 Dec 2009 19:54:54 -0500, Vinay Devanathan
<vinay.devanathan@xxxxxxxxx> wrote:
> Hello,
>
> After I import an idf file from other interface into E+, and I then
delete
> some zones and surfaces properly will still make my model work right?
>
> Thanks.





__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___