[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Output in a Spreadsheet





Excel reads .csv files.  So does Word or almost any text editor.

 

The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Sumwel Plus
Sent: Wednesday, January 20, 2010 4:16 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Output in a Spreadsheet

 

 

Thank you Linda. I am making a head way in trying to fix the errors and the button is anabled now. However, it is asking for a program that can display a CSV file to be able to view spreadsheet.

 


From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Tue, January 19, 2010 7:46:28 PM
Subject: Re: [EnergyPlus_Support] Output in a Spreadsheet

 

Did you look at the .err file -- perhaps the simulation did not complete far enough to produce outputs.

If you can't figure something out -- send the input file to the helpdesk: energyplus-support@ gard.com

At 12:19 PM 1/19/2010, Sumwel Plus wrote:

Thank you! I have spent so much time to go through the tutorials. I have also run some of the sample files and the spredsheet button was enabled.
I picked an example file to edit with my input but just after the spreadsheet button ceased to be enabled. I have an object under output variable. But the pull down menu under variable name is not active.
 
What could be wrong then? please, please am getting behind my work schedule

 

 

From: Linda Lawrie <linda@fortlawrie. com>
To: EnergyPlus_Support@ yahoogroups. com
Sent: Tue, January 19, 2010 3:20:33 PM
Subject: Re: [EnergyPlus_ Support] Output in a Spreadsheet

 

Look at the .err file.  See what errors were in your simulation.

Have you included "output:variables" in your input file?  If you have none, you will have no spreadsheet output.

Have you run some of the tutorials prior to this?  And did they work okay?

Run one of the example files -- they all have outputs to the spreadsheets.

At 02:05 AM 1/19/2010, Sumwel Plus wrote:

I am generating a spreadsheet in E+ Luanch, but the spreadsheet button under is not enabled. Have tried it by going to View/Options, select and autofind but is still not enabled.




 



__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___