RE: [EnergyPlus_Support] Re: Daylighting in Energy Plus

[rasha mahmoud <roushaa_84@xxxxxxxxx>]

Dear Dr. Li,

First, I'd like to thank you very much for your advice. I've been reading the IO Ref Manual, I did generate the daylighting map. However, I tried to generate the output of  dimming control by DAYLIGHTING objects and the output that I need, but I had 2 severe errors.

 

Surface,Average, Daylight Luminance of Window As Viewed From Ref Point 1 [cd/m2]
Surface,Average, Daylight Illum at Ref Point 1 from Window [lux]
Zone,Average, Daylight Illum at Ref Point 1 [lux]
Zone,Average, Glare Index at Ref Point 1 []
Zone,Sum,Time Exceeding Glare Index Setpoint at Ref Point 1 [hr]
Zone,Sum,Time Exceeding Daylight Illuminance Setpoint at Ref Point 1 [hr]
Zone,Average, Ltg Power Multiplier from Daylighting []

Please help and advis eme. I really appreciate it.

Thank you very much

Rasha
 

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\d7.idf