RE: [EnergyPlus_Support] input for HAMT modeling outputs

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

Suggest that you read the description of the HAMT model in
the Engineering Reference.  starting on page 30, pdf page
67.


At 11:13 AM 2/1/2010, ozgur gocer wrote:


> thanks for your reply. In
> modeling wufi a grid is needed. but in Energyplus the input is only the
> thickness of layer. Then how can we specify the number of cell? If i
> specify for the output of RH, temperature or water content from 1 to let
> say 10 cells,  does the program divide the construction (e.g a wall)
> into 10 cells?
> best wishes
> ozgur gocer

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___