Every example file uses GHE for the Supply / plant side. None use a boiler and cooling tower or fluid cooler. We?d like to see how the latter system is set up because E+ gives a fatal error for the Fluid cooler in our attempts at setting it up.
All assistance appreciated!
The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Edwin Lee
Sent: Tuesday, April 06, 2010 10:06 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: Water Source Heat Pump
If you are referring to water to air heat pumps,
5ZoneWaterLoopHeatPump.idf
5ZoneWLHPPlantLoopTower.idf
HeatPumpWaterToAir.idf
HeatPumpWaterToAirEquationFit.idf
HeatPumpWaterToAirWithAntifreezeAndLatentModel.idf
HeatPumpWaterToAirWithAntifreezeAndLatentModel2.idf
to name a few. If you were interested in something else, just let me know.
Edwin
On Tue, Apr 6, 2010 at 09:01, rjhoffman_00 <rjhoffman00@xxxxxxxxx> wrote:
I haven't heard from anybody yet, so I am going to ask again. Is there an example file for a Water Source Heat Pump or does anyone one have experience modeling that type of system?
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "rjhoffman_00" <rjhoffman00@...> wrote:
>
> Is anyone aware of a example file for a WSHP? I am trying to model one using a boiler and a cooling tower and would like an example file that is similar.
>
__._,_.___