Thanks! Perfect.
The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Edwin Lee
Sent: Saturday, April 10, 2010 8:08 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: Water Source Heat Pump
James:
I think the second file I mentioned may be what you
want. 5ZoneWLHPPlantLoopTower has a single plant loop with a cooling
tower and a boiler. There are 5 water source heat pumps connecting the
zones with the loop. This used with dual setpoint operation to achieve
the typical water loop heat pump setup.
On Tue, Apr 6, 2010 at 10:06, James
V Dirkes II, PE <jvd2pe@xxxxxxx>
wrote:
Every
example file uses GHE for the Supply / plant side. None use a boiler and
cooling tower or fluid cooler. We’d like to see how the latter
system is set up because E+ gives a fatal error for the Fluid cooler in our
attempts at setting it up.
All
assistance appreciated!
The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
On Behalf Of Edwin Lee
Sent: Tuesday, April 06, 2010 10:06 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: Water Source Heat Pump
If you are referring to water to
air heat pumps,
5ZoneWaterLoopHeatPump.idf
5ZoneWLHPPlantLoopTower.idf
HeatPumpWaterToAir.idf
HeatPumpWaterToAirEquationFit.idf
HeatPumpWaterToAirWithAntifreezeAndLatentModel.idf
HeatPumpWaterToAirWithAntifreezeAndLatentModel2.idf
to name a few. If you were interested
in something else, just let me know.
Edwin
On Tue, Apr 6, 2010 at 09:01, rjhoffman_00
<rjhoffman00@xxxxxxxxx>
wrote:
I haven't heard from anybody yet,
so I am going to ask again. Is there an example file for a Water Source Heat
Pump or does anyone one have experience modeling that type of system?
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx,
"rjhoffman_00" <rjhoffman00@...> wrote:
>
> Is anyone aware of a example file for a WSHP? I am trying to model one
using a boiler and a cooling tower and would like an example file that is
similar.
>
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___