[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: can't figure out how to fix errors

Hi 

Can you see the HVAC diagram(SGV) and is everytjing Ok?

Once I had a problem and found out that the actual equipment wasan´t connected to the zone.

If you want send me your IDF.

MN

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Morss, Greg" <gmorss@...> wrote:
>
> Hello,
> Yes I have a sizing object for the zones and the plant.  And yes there are internal gains (people, equip and lights) for all zones.  I am getting the cooling load Warning for each of my 15 zones.  Any idea what to do?
> 
> Greg
> 
> ________________________________
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of mneves32
> Sent: Tuesday, April 13, 2010 2:18 AM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] Re: can't figure out how to fix errors
> 
> 
> 
> Hello
> 
> Some questions:
> - Does your zone have a sizing object?
> - Does your plant have s sizing object?
> - Does your zone have internal gains ?
> 
> MN
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx<mailto:EnergyPlus_Support%40yahoogroups.com>, "greg.morss" <gmorss@> wrote:
> >
> > Hello,
> > I am trying to simulate a 100% Outside air with Heat Recovery system for a project that I am working on, and have fixed all the connection errors that have come up, but now I am getting a large number of warning which are causing the simulation to fail and I cant figure out how to correct them or where to look. The first one is:
> > ** Warning ** Calculated design cooling load for zone=CORNER 1 is zero.
> > ** ~~~ ** Check Sizing:Zone and ZoneControl:Thermostat inputs
> >
> > and when I check where it recommends, everything looks correct.
> >
> > The next one is :
> > ** Warning ** PlantFlowResolver: Branch flow rates out of bounds, for Plant Loop=HW LOOP, Branch=HW INTERIOR REHEAT COIL BRANCH
> > ** ~~~ ** Conditions should be: 0.631 <= 0.132 <= 0.568 Occurrence info=NORMAL, 01/01 00:00 - 00:15
> >
> > Any ideas where i should start?
> >
> >
> > Thanks
> >
>




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/