Re: [EnergyPlus_Support] opening file

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

As Dru says, there is now a GUI IDF Converter which, when
coupled with the set of transition programs, essentially does this all in
one step.   Your way will work but is very slow and takes
leaving all the EnergyPlus versions on your machine.

The set of transition programs is available on the helpdesk:

http://energyplus.helpserve.com

At 12:41 AM 6/12/2010, Xichun Wang wrote:


> As my experiences, you can try
> to convert the Ver2.2 of IDF into Ver 3.0 by opening IDF Ver.2.2 with
> E+3.0, then click "file-transition version", the transition of
> IDF from V2.2 to Ver 3.0 will be finished. Then using E+3.1 to convert
> Ver.3.0 to Ver3.1.... In this way, you will finish the transition from
> V2.2 to V5.0 successful.Â

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___