Yes, but the Natural Gas for a zone output might only be the "GasEquipment" -- instead of attributing what gas is used in a system to the zone.
All the output variables are described in the Input Output Reference (with a few exceptions where they have been overlooked)
Variables that are "available" for outputting are shown in the .rdd and (meters) in the .mdd file. For which, you need to have put in a:
Output:VariableDictionary,idf;
(If you do the above the rdd and mdd files will contain lines that are ready to be put into an IDF)
At 09:07 AM 6/18/2010, Vinay Devanathan wrote:
Mr. Silva,
Thank you so much for the suggestion. I tried it and achieved some success in getting the total electric consumption of the zone. But, I am not able to do the same with Natural Gas consumption. Is there anything that I am missing?
With Output:Variable object, is it possible to specify the zone name in Key Value field and say whatever output I need from the list? Would this work?
Thank you very much.
On Thu, Jun 17, 2010 at 5:08 PM, Fernando Pinto da Silva < pintodasilva.fernando@xxxxxxxxx> wrote:
- Dear Devanathan,
- It´s possible to know the total energy consumption of one zone, by the fields of Output Reporting. In this fields you can choose the Output:Variable or Output:Meter and select the desire zone or zones to energy studies.
- Best Regards
- From: Vinay Devanathan < vinay.devanathan@xxxxxxxxx>
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sent: Thu, June 17, 2010 9:48:41 PM
- Subject: [EnergyPlus_Support] zone energy consumption
- Hello,
- Is it possible to know the total energy consumption of just a zone?
- Thank you.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___