I may be wrong.
When you have a window in the second zone, the received solar will be through the external and then the interior one. This is how you get the intensity at the reference point of the example.
There should be two columns in the .cxv, one for each zone. The use of the ,*, in the IDF as key should give you values for each zone.
The value for the interior window should be different from the exterior one, dependent on the solar angle. The diffused component is resolved into a horizontal component and then through the interior window, I believe.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: my_sunny_night@xxxxxxxxx
Date: Tue, 3 Aug 2010 18:43:23 +0000
Subject: [EnergyPlus_Support] Re: ---solar transmitted through interior window---
But "Zone Transmitted Solar Energy" is applicable only to exterior windows. So, I cannot check in this way.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@...> wrote:
>
>
> Hi, Sara
>
> I have not used an internal window in my buiding simulation, and therefore cannot conform whether the name you have quated are correct.
> ==================
>
> After running the following file which is in the exampleFiles folder.
>
>
> PurchAirWithDoubleFacadeDaylighting.idf
>
> ========
>
> Zone,Average,Zone Beam Solar from Exterior Windows [W]
> Zone,Average,Zone Beam Solar from Interior Windows [W]
> Zone,Average,Zone Diff Solar from Interior Windows [W]
> Zone,Average,Zone Window Heat Gain [W]
> Zone,Average,Zone Window Heat Loss [W]
> Zone,Sum,Zone Transmitted Solar Energy [J]
> Zone,Sum,Zone Beam Solar from Exterior Windows Energy [J]
> Zone,Sum,Zone Beam Solar from Interior Windows Energy [J]
> Zone,Sum,Zone Diff Solar from Interior Windows Energy [J]
> Zone,Average,Beam Sol Intensity from Int Windows on Inside of Surface [W/m2]
> Zone,Average,Beam Sol Amount from Int Windows on Inside of Surface [W]
>
> These are some of the output available in the .rdd file, after running the example.
>
>
>
> You can request the output for these variables and compare the result. I think your equation is correct. The value is the sum for a zone, should therefore applies to a single window as well.
>
>
>
> Dr. Li
>
>
>
>
>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: my_sunny_night@...
> Date: Tue, 3 Aug 2010 16:13:54 +0000
> Subject: [EnergyPlus_Support] ---solar transmitted through interior window---
>
>
>
>
>
> Hi Dears,
>
> I still do not know the answer to my question as follows.
>
> If it is assumed that a zone has only one window, is this true to say that:
> "solar transmitted through interior window" = "zone beam solar from interior windows" + "zone diff solar from interior windows"?
>
> Thanks,
> Sara
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___