[EnergyPlus_Support] Not Expected Results for A Simple idf file

[Georgios Giannakis <giannakis.georgios@xxxxxxxxx>]

Dear Forum,

In the idf which is attached 1 room with 2 windows is modeled (the example is based on case600 of BESTEST).
There is no heating, cooling, infiltration or ventilation and no internal gains. The output variables are


 1. Zone Mean Air Temperature
 2. Outdoor Dry Bulb Temperature.

Given that there is no heating, cooling, infiltration or ventilation and no internal gains, I expected that comparing
the values of 2 variables at each time step there would be no major differences. Any idea why does this happen?

p.s. The same example with no windows has reasonable results.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\EMSWindowShadeControl2.idf